Dynaudio Emit 30 - Floor Standing Speaker - Pair - AVStore
Dynaudio Emit 30 - Floor Standing Speaker - Pair - AVStore
Dynaudio Emit 30 - Floor Standing Speaker - Pair - AVStore
Dynaudio Emit 30 - Floor Standing Speaker - Pair - AVStore
Dynaudio Emit 30 - Floor Standing Speaker - Pair - AVStore
Dynaudio Emit 30 - Floor Standing Speaker - Pair - AVStore
Dynaudio Emit 30 - Floor Standing Speaker - Pair - AVStore
Dynaudio Emit 30 - Floor Standing Speaker - Pair - AVStore
Dynaudio Emit 30 - Floor Standing Speaker - Pair - AVStore
Dynaudio Emit 30 - Floor Standing Speaker - Pair - AVStore
Dynaudio Emit 30 - Floor Standing Speaker - Pair - AVStore
Dynaudio Emit 30 - Floor Standing Speaker - Pair - AVStore
Dynaudio Emit 30 - Floor Standing Speaker - Pair - AVStore
Dynaudio Emit 30 - Floor Standing Speaker - Pair - AVStore
Dynaudio Emit 30 - Floor Standing Speaker - Pair - AVStore

Dynaudio Emit 30 - Floor Standing Speaker - Pair

Sale priceRs. 208,000
Color:
Quantity:

EMIT 30

Premium woofer technology

The cones are moulded in one piece; we don’t use a separate glued dust-cap. The little balance ribs around the edge of the centre are bonded directly to the voice-coil behind it, making the whole motor assembly one solid piece. Using fewer moving parts gives their engineers fine control over how the speaker moves – which, in turn, means fine control over how it performs. You’ll hear it as strong, tight bass and startlingly clear vocals, guitars and more. Even at eyebrow-raising volume.

Each woofer is powered by a dual-stacked strontium carbonite Ferrite+ ceramic magnet system. Using two magnets means we can more effectively direct where the magnetic energy goes – it’s a lesson we learned developing the award-winning Special Forty anniversary series, and it’s thrilling to be able to use it in their entry-level family.

The target for all that flux is the voice-coil. They use aluminium windings in Emit 30. Aluminium is light (which minimises inertia on the cone’s back-and-forth movement), and because it’s lighter than copper wire, it means they can pack more windings on to the two-layer glass-fibre former. More windings equals more power, and greater control over fine movement. There’s a twist, though (please pardon the pun): they have coated the aluminium wire in a very thin copper coating to further increase the control the amplifier has on the voice-coil. More force with only a fractional weight gain: win-win.

High-performance Cerotar tweeter

While the twin 14cm mid/bass units deal with the midrange and bas the upper frequencies are handled by the tweeter. Emit might be an ‘entry-level’ speaker, but they certainly haven’t used any old unit off the shelf; witness the incredible Cerotar tweeter (the same as they use in Evoke). It’s based on the Esotar Forty anniversary tweeter and the Esotar Pro found in their Core studio reference speakers, and must be heard to be believed.

The 28mm coated soft-dome diaphragm is backed up by the clever Hexis inner dome. The playing surface has been specifically engineered to produce ultra-clear, ultra-detailed high-frequencies without breakup (even at high volumes), while the Hexis smooths the airflow behind it to reduces unwanted resonances. An aluminium voice-coil and airflow magnet system provide the power. Cerotar is designed for high performance without listener fatigue – perfect if you’re given to long listening sessions. The bass-port on the back panel has dual flares (one inside; one outside), and has been tuned to minimise unwanted ‘chuffing’. It’s supplied with foam inserts that can be used to optimise performance for the speaker’s position relative to the wall.

Danish-designed cabinetry

Emit 30’s cabinets are made from 18mm MDF to provide a solid, stable platform for the drivers to do their work. They’re internally damped with polyester fibre, measured down to the gram for exactly the right amount of resonance suppression.

On the outside, you can choose from three custom laminate finishes: Black, White or Walnut. They’ve been chosen to complement any room, in any configuration (so if you’re mixing and matching Emit speakers in a home cinema system, you can make them stand out or blend in as you want).

Emit 30: powerful floorstander performance in a compact package. If you want to take your listening to the next level, they’ll really make your collection sing.

Features

Designed and engineered in Denmark

The entire Emit family has been put through its paces in our world-class Jupiter measuring facility at Dynaudio Labs. They treat it exactly the same as they do every other speaker in their range: no stone left unturned.

Cerotar tweeter

Emit uses the highly regarded Cerotar tweeter from their Evoke series. It's a high-quality high-frequency driver inspired by their top-end Confidence and Heritage Special speakers, and includes the innovative resonance-defeating Hexis inner dome.

Clean and simple

Each speaker in the Emit range is designed to fit with modern lifestyles and interiors. Clean lines, simple finishes and minimalist Scandinavian looks – whether you're listening in stereo or have a full multi-channel system.

Sensitivity

87dB (2.83V/1m)

IEC power handling

180 watt

Impedance

4 Ω

Frequency response (± 3 dB)

44Hz - 25kHz (-6 dB 39 Hz - 35 Khz)

Box principle

2 X Bass reflex rear double flared port

Crossover

2.5-way

Crossover frequency

1000/3550Hz

Crossover topology

1st order tweeter 2nd order midrange

Midrange / Woofer

14cm MSP

Woofer

14cm MSP

Tweeter

Cerotar soft dome with Hexis

Weight

15.53 kg

Dimensions (W x H x D)

170 X 900 X 271,5 mm 6.7 X 35.4 X 10.7 in