BackBack

Parasound Halo Hint 6 - Integrated Amplifier

Rs. 326,000.00

  • • Free Shipping (India)
  • • Brand New Unit(s)
  • • Price Includes GST
  • • Official Manufacturers Warranty
  • • EMI Payment Option Available
Description

PARASOUND HALO HINT 6

Features

  • Burr Brown analog resistor ladder volume control
  • Dimmable front panel volume display
  • Updated USB receiver is Plug and play with Windows 10 and MAC
  • An additional optical input (2 total)
  • Ball bearing supported solid aluminum volume knob
  • Programable default turn on volume setting
  • Favorite volume memory with remote control button
  • Increased phono stage gain for lower output cartridges
  • Improved Left/Right channel separation and balance tracking
  • Updated cosmetics with subtle gold highlights

Preamp and DAC Features

  • ESS Sabre32 Reference DAC (ES9018K2M)
  • Asynchronous USB 2.0 supports PCM up to 384kHz/32-bit
  • USB input decodes Native DSD64, DSD128, DSD256 and DoP DSD
  • Coax and optical inputs accept PCM up to 192kHz/24-bit
  • Analog bass management with high & low pass crossovers
  • Home theater bypass input for surround sound integration
  • Front panel subwoofer level control
  • Dedicated high current headphone amplifier (TI TPA6120)
  • Phono input for MM, MC and MI with 100 Ω or 47k Ω load
  • Front panel Aux input with automatic +12 dB gain stage
  • 5 pairs RCA line level Analog inputs
  • 1 pair XLR balanced Analog input
  • Balanced XLR and RCA left and right preamp outputs
  • 1 balanced XLR and 2 RCA subwoofer outputs
  • Bass & treble controls with relay bypass from remote or front panel
  • Rear panel IR input and IR loop output jacks
  • 12 Volt trigger output
  • Back-lit remote control with discrete buttons
  • 0.5w standby power consumption meets Energy Star & EU specs

Power Amp Features

  • 160 Watts x 2 @ 8 Ohms (RMS, both channels driven)
  • 240 Watts x 2 @ 4 Ohms (RMS, both channels driven)
  • Power amp circuit topology designed by legendary John Curl
  • Direct amplifier input to bypass preamp section
  • High bias class A/AB operation
  • Oversized shielded toroid power transformer
  • Dual-mono power supply and power amplifier
  • 40,000uF power supply filter capacitance
  • Matched JFET input stages and MOSFET driver stages
  • 12 high voltage/high current bipolar output transistors
  • Heavy-duty 24k gold-plated 5-way speaker binding posts
  • Over temp and short circuit relay protection

SPECIFICATIONS

Power Output - Both channels driven

  • (0.9% THD, 20 Hz - 20 kHz)
  • 180 watts x 2 @ 8 Ω RMS
  • 270 watts x 2 @ 4 Ω RMS

Current Capacity

45 amps peak per channel

Frequency Response

  • 10 Hz - 100 kHz, +0/-3 dB
  • 20 Hz - 20 kHz, +0/-0.5 dB

Total Harmonic Distortion (THD)

  • < 0.01 %, average listening levels
  • < 0.05 %, 160 watts x 2 @ 8 Ω

Interchannel Crosstalk

  • > 70 dB at 20 kHz
  • > 78 dB at 1 kHz

Signal to Noise Ratio - IHF A-weighted

  • Line in: - 103 dB (input shorted)
  • Digital in: - 106 dB

Amplifier Damping Factor

> 800 at 20 Hz

Preamplifier Stage Input Sensitivity

  • 300 mV in for 1 V at Preamp Output jacks
  • Total Preamp Stage Gain: 10 dB
  • Max Output Unbalanced: 7 V
  • Max Output Balanced: 9 V

Power Amplifier Stage Sensitivity

  • 1 V at Bypass/Amp In for 28 V at Speaker Out
  • Total Amp Stage Gain: 28 dB

Phono Stage Sensitivity / Input Impedance

  • MM: 41 dB / 47 k Ω
  • MC: 54 dB / 47 k Ω or 100 Ω

High & Low Pass Crossover Slope

12 dB per octave

Supported DAC Sampling Rates

  • USB: up to 384 kHz / 32-bit PCM
  • DSD Native: DSD 64, DSD 128, DSD 256
  • DSD over PCM (DoP) at 384 kHz

Coax/Optical

Up to 192 kHz / 24-bit PCM

Digital to Analog Converter

  • 384 kHz / 32-bit
  • ESS Sabre32 Reference ES9018K2M

USB 2.0 Controller

 

Savitech SA9227, 384 kHz / 32-bit

Headphone Amplifier

 

  • Texas Instruments TPA6120A
  • Output Impedance 10 ohms

XLR Pin Identification

  • 1 = Ground (Shield)
  • 2 = Positive
  • 3 = Negative (Return)

 

Input Impedance

 

Unbalanced: 24 k Ω

Balanced: 100 k Ω per leg

Preamplifer Output Impedance

  • Unbalanced: 100 Ω
  • Balanced: 470 Ω per leg

Dimensions

 

  • Width: 17-1/4" (437 mm)
  • Depth: 16-1/4" (413 mm)
  • Depth, with cables 17-1/4" (437 mm)
  • Height, with feet: 5-7/8" (150 mm)
  • Height, without feet: 5-1/4" (133 mm), 3U

Net Weight

 

33 lb. (15 kg)

Shipping Weight

45 lb. (20.4 kg)

Power Requirement

 

  • Standby: 0.5 watts
  • Idling power: 70 watts
  • Maximum: 750 watts
  • 110-125 VAC 60 Hz or 220-250 VAC 50 Hz
  • AC mains voltage is set on rear panel
Delivery

Here at AVStore, we have a vast experience with e-commerce for electronic products. Making sure that your package arrives undamaged is a huge priority for us. That's why at AVStore, we only use our trusted courier partners for all our orders which are always sent ‘Signed For’ to make sure it gets to the right person.

We e-mail the tracking number and tracking website as soon as the package is picked up by the courier company so you can track your parcel all the way from despatch to your front door and therefore also ensure that you are home, offering you peace of mind.

If for any reason your parcel does arrived damaged, please get in touch, and we will be happy to get everything resolved for you. We are always on hand to help!