SIGMA MONO
The Classé Sigma Mono Amplifier seeks to deliver highest levels of performance with minimum energy consumption. This economically priced monaural amplifier is the most recent addition to Classé Sigma range. It features the same proprietary design, which the earlier launched Delta series CA-D200 and Sigma AMP2 and AMP5 amplifier models had.
Sigma Mono Monaural Amplifier from Classé supports powerful output of 350W rms into 8 Ohm and 700W rms into 4 Ohm. It allows you to listen to every minute detail with maximum clarity and is compatible to work on the most demanding frequency range. Each channel in the Sigma Mono comes equipped with a dedicated chassis. This smart arrangement leaves no room for any crosstalk between the channels. It also lets the amplifier work with shortest possible speaker cables. The end result is - a pure sound with least distortion!
The amazing sound quality of Sigma Mono is majorly attributable to its huge switch mode power supply. Mono has an all-new analog input stage. Output stage operations too have been modified. The device also has got innovatively designed output filters for an optimum performance. Forwarding of the input signal to a second amplifier for bi-amplifying becomes easy with a unique pass-thru functionality. This special feature also gives you an option to use a subwoofer amplifier. Since the amplifiers can be positioned extremely close to each speaker, therefore, you can conveniently use a single long interconnect to connect the preamp and amp, and a short interconnect for multiple Mono Amplifier units. The compact-sized Classé Sigma Mono Amplifier will not eat up much space in your entertainment room or living room.
SPECIFICATIONS
Frequency response |
10Hz – 20kHz, -1dB into 4Ω |
Output power |
|
Harmonic Distortion |
<0.012% @ 1kHz driven to 1/8th power into 8Ω |
Peak Output Voltage |
|
Input Impedance |
100kΩ Balanced / 50kΩ SE |
Voltage gain |
29 dB |
Input level at clipping |
1.8Vrms Balanced/SE |
Intermodulation Distortion |
>80 dB below fundamental into 8Ω Balanced |
Signal to Noise Ratio |
-109 dB at peak output into 8Ω (AES17) |
Standby power consumption |
.5W @ 230 V |
Rated power consumption |
130W @ 1/8th power into 4Ω |
Mains voltage |
90V - 264V, 50/60Hz |
Overall Dimensions |
|
Net weight |
22.0 lb (10.00 kg) |