Blogs

15 Best Home Theatre System Upgrades on a Budget

15 Best Home Theatre System Upgrades on a Budget

15 Best Home Theatre System Upgrades on a Budget

A new TV, home cinema speaker package and a 4K projector are all things of beauty but not the kind of purchases most people can make each year. That doesn’t mean that you’re stuck with your current AV set-up, though. There are plenty of additions and upgrades you can do mid-cycle to significantly improve your viewing and listening experience – and all without breaking the bank.

We've started our budget AV upgrade suggestions with what you can do for free to get the most out of your current kit before moving on to new AV purchases. Generally, things get more expensive the further down the page you go, but we've tried to keep it all below ₹50,000, bar the odd splurge.

If you get to the end and there’s still nothing here for you, then it’s probably time to get a new TV after all.

1. Calibrate your TV

TV Not Calibrated vs TV Calibrated Image

Most TV’s do not perform at their best straight out of the box and, if you haven't had much of a fiddle with your settings, then you really ought to. At the basic level, make sure your TV isn't set to the shop demo mode, then cycle through the picture presets to find the one that you like best. We'd also recommend switching off any ambient light detection modes for the best and most consistent experience.

After that, it's time to investigate some of the picture processing modes which can be positive but may also end up ruining the picture. Be mindful that the most dramatic differences can actually crush subtlety and detail.

Don't forget that your TV has sound settings too. These are usually less involved than picture settings, but they can be well worth exploring. Often, modes like Bass Boost and Dialogue Enhancement will have a price to pay in dynamics as well as balance and might better be left alone. If you really want more bass, perhaps buy a soundbar or a subwoofer.

2. Rearrange Your Furniture

TV Calibrated vs TV Not-Calibrated Image

There may be constraints, including objections from people you share a home with, but the more you can arrange your room to prioritise your AV equipment, the better the viewing experience you'll get.

There are some basic principles of TV positioning which you can follow and, if that involves buying a proper TV stand, then maybe it's time to invest.

Make sure your screen is at eye-level – even if it's wall-mounted. If you have to have it higher, then make sure you tilt it downwards so that it's square-on to your line of sight. While the top TVs have decent viewing angles, you're still only going to get the very best picture when you're right in the middle.

Viewing distance is, of course, important and it depends on the size of screen and the resolution, and try to avoid placing your TV right by a window where strong light could affect your appreciation of contrast.

3. Move Your Speakers

5.1 Channel Home Theatre System Speaker Placement Diagram

Speaker positioning is crucial to experiencing the best of the soundtrack of your film or TV show. Delve into the ITU positioning diagrams online to see exactly how to set-up your speakers. This depends on how many channels you have, of course, but the guiding principles are easy enough.

Viewed in plan (ie. top-down) you should be able to draw a circle with your head at the centre and your speakers on the circumference. In other words, ideally, they should all be at the same distance from your ears.

In a 5.1 arrangement, the right and left front channels should be at 60 degrees from one another with the centre channel right in front in between them. The surrounds need to be not level but just behind at around 110 degrees round from the centre. For a 7.1 channel system, that changes slightly.

4. Recalibrate Your AVR

Calibration Menu Screen on Home Theatre AV Receiver

Now that speaker placement is sorted, you need to make sure you've got the levels right. Your AVR should come with a calibration mode – this usually involves a microphone, which you then place in a few different positions. The AVR then sends out sounds to your speakers for the microphone to pick up. Every time you move your speakers or viewing position, you'll need to do this calibration again.

Based on that, your AVR will come up with a set of sound levels for each channel, though it's always worth doing a little fine-tuning by ear.

5. Speaker Stands

Black Colour Speaker Stand for Bookshelf Speakers

If you've already managed to tack a pair of hi-fi speakers onto your TV, well done. Now you can take them off your bookshelf and mount them on a proper pair of stands.

Not only will stands keep them steady so they can do their job with greater precision, but they also allow you the flexibility to position yourself right in the sonic sweet spot.

6. Upgrade Your Speaker Cable

AudioQuest Rocket Series Speaker Cable Images

So often forgotten and such an easy improvement, great speaker cable can make a big difference to your home cinema sound. You may already have the best there is but, if not, it can be a relatively inexpensive upgrade.

The AudioQuest Rocket 11 cable is a fan-favourite.

7. Upgrade Your HDMI Cables

High Quality HDMI Cables Connected to AV Receiver

Some may doubt the difference that good digital cables can make, but we believe that if you spend a little, you will get much more. There's no need to go crazy – keep it below ₹4,000 at the most. Something like the AudioQuest HDMI Pearl cable does nicely, but as long as you upgrade beyond the HDMI cable that came free in the box with your AV equipment, you should see some benefits.

8. Buy a Soundbar

Soundbar Wall-Mounted Below a TV 

It's obvious, but still worth pointing out. The speaker cabinets of most TVs simply aren't big enough to offer much quality in the way of sound. Some sets have soundbars built-in, but they're in a minority. So, a hugely effective way to boost your enjoyment of TV and film is to buy a soundbar – even a modestly priced one, such as the Denon DHT-316, can make a difference to dialogue and sound effects.

If you're happy to spend a little more, you can pick up something like the Cambridge Audio TVB2 which will add a lot more finesse and good sound performance to your home theatre experience.  Slightly over budget but the next level up for sound is the Dali Katch One.

9. Buy a Subwoofer

SVS Subwoofer Kept Inside a Living Room

If an entire speaker package seems a bit of a stretch, just buy one piece of it. The addition of a subwoofer to your AV set-up will make a huge difference, given that flat-panel TV speakers struggle most with bass.

Check your current AV set-up for any kit with a sub-out connection. If you're out of luck, you'll need to find an AVR to plug it into

If you already own a speaker package, then consider an upgrade to your subwoofer. Most speaker package manufacturers offer an upgraded version of the sub that came with the kit. The Q Acoustics QB12, for example, will bring a whole new level of punch to the Award-winning Q Acoustics 3050i and 3010i speaker packages.

10. Buy an AV receiver or Upgrade The One You Have

AV Receiver Kept on a Table

An AVR on its own won't do anything for your sound, but it opens up your TV to a whole new world of potential. Besides, you may find you have an old pair of hi-fi speakers somewhere in the house that you can plug in and make a front stereo pair – until you've saved up enough cash for a whole speaker package.

There's no need to spend a huge amount on an excellent AVR. The Yamaha RX-V585 and Denon AVR-X2600H are both superb.

If you already have an AVR, then it may be time for an upgrade. A step-up model should offer more channels and perhaps Dolby Atmos, both of which bring room for expansion. It will also sound better but be warned that you'll only be able to appreciate that difference if your speakers are equally matched (in terms of price).

11. Add More Speaker Channels

Dolby Atmos 11.1 Channel Setup Layout Diagram

So, you've got 5.1 sorted. Fine, but how many channels can your AVR support? A set of standmounter rears can bump you up to a 7.1 and then you can add a second sub as well.

For some really interesting AV bang-for-buck, though, add the dimension of height with some Dolby Atmos speakers. Many home cinema speaker packages offer small and relatively inexpensive Atmos modules which will sit on top of the speakers that you already own and fire upwards. That's a great alternative to ripping holes in your ceiling for a custom install.

12. Buy a New Speaker Package

Dali Oberon Series 5.1 Channel Speaker Package

If you don't have any speakers or are feeling flush, then you could just shell out on a home cinema speaker package. This will most likely blow our notional budget unless you trade-in or sell second-hand the speaker package you already own.

It is possible to buy a 5.1 speaker package within your budget if you go for the excellent and reasonably-priced Polk Audio TL-1600 but, if you can make a bigger investment, something like the Dali Oberon - 5.1 Speaker Package is a terrific option.

14. 4K Media Streamer

Apple TV 4K Media Box with Remote

If returning to physical discs feels like a backward step, the next best 4K content option is a media streamer. Most TVs won't have all the 4K apps and services you need, and a media streamer is a cheap and easy fix.

The Apple TV 4K is a great buy and fills most of the 4K service gaps, including its huge library of 4K HDR films to enjoy. You also get voice control through Siri and guaranteed Dolby Atmos streams when stated on the iTunes store.

15. Big and Dirty with a Projector

Projector Illuminating with Light

Sure, your TV might be 4K, but does it have a 300 inch screen? 

No, we didn't think so. However, that kind of scale is normal for the home projector course.

A projector-based home cinema set-up is an expensive outlay if done properly, but if you just want to go big, then a projector and a good piece of wall will do. You can add the refinements of sound and a proper screen at a later date.

The best value options out there are the excellent Optoma UHD65 4K projector and the Epson EH-TW9400, however, both are well beyond the notional budget. If you need to keep costs down, you can always spend less on something like the Full HD Epson EH-TW650, though you may feel the need to upgrade fairly soon.

You can use a laptop, games console, disc player or any kind of HDMI streamer as a source. The only caveat is that you'll need to take your audio from the source too and not the projector.

Your other choice is to do things properly and buy an AVR and speaker package.

AVStore Blog Powered by What HiFi? Disclaimer

Leave a Reply

Your email address will not be published. Required fields are marked *